1. All 3M Products

3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS Tan, 50 mL, 12 per case

3M ID 62279914352UPC 00021200490828
  • Good impact resistance for durable bonds
  • Ideal for industrial applications by bonding hard-to-adhere substrates with minimal surface preparation
  • Excellent shear and peel strengths ensures a tough, durable, and permanent bond
  • Rapid cure after mixing; handling strength in 20 minutes
 More...
Specifications
  • Adhesion Strength
    320 oz/in
  • Adhesive Type
    Acrylic
  • Brand
    Scotch-Weld
  • Color
    Tan
  • Consumer Label
    No
  • Full Cure
    8-24 Hours @ 72 F (22 C)
  • Industries
    Construction, Consumer Goods, Electronics, General Industrial, Metalworking, Military & Government, Specialty Vehicle, Transportation
  • Mix Ratio Volume Base:Accelerator
    1 : 1
  • Open Time
    10 minutes @ 72 F (22 C)
  • Physical Form
    Flowable Liquid
  • Product Form
    Each
  • Product Type
    Acrylic Adhesive
  • Set Time
    10 Minute
  • Shear Strength at 72 Degrees F (22 Degrees C)
    4000 Pound-Force Per Square Inch
  • Shelf Life in Months (from date of manufacture)
    12
  • Specific Gravity
    1.07
  • Storage Temperature
    <=40 Degree Fahrenheit
  • Substrate 1
    Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Wood & Hardboard
  • Substrate 2
    Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Wood & Hardboard
  • Substrates
    Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Wood & Hardboard
  • US Govt Contract Number
    GS-21F-0075x
  • Viscosity Range (cps) at Room Temperature
    95,000
  • Volume (metric)
    50 ml
Details
  • Good impact resistance for durable bonds
  • Ideal for industrial applications by bonding hard-to-adhere substrates with minimal surface preparation
  • Excellent shear and peel strengths ensures a tough, durable, and permanent bond
  • Rapid cure after mixing; handling strength in 20 minutes
  • Non-sag formula is an effective adhesive system for a variety of difficult applications

3M™ Scotch-Weld™ Low Odor Acrylic Adhesive 810NS is a low odor acrylic adhesive designed to produce less odor when applied than traditional acrylic adhesives. It is ideal for industrial environments and difficult applications such as bonding slightly oily steel, galvanized steel and aluminum. It is commonly used in a wide range of industries.

3M™ Scotch-Weld™ Low Odor Acrylic Adhesive 810NS is able to perform on the most difficult surfaces, such as oily metals and many plastics. It offers excellent sheer and peel strength and that makes it ideal for industrial applications where permanent, high-strength bonding of similar and dissimilar surfaces is a requirement. This includes bonding metals such as stainless steel and aluminum. With high impact resistance it will effectively bond wood, plastic and metal with minimal surface preparation. Our 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive 810NS acrylic allows for precise application while ensuring your adhesive remains where you apply it, even on vertical surfaces.

Recommended Applications

  • Bonding
  • Joining
  • Gluing
  • Attaching
  • Assembling

Two Parts, One Common Bond
The mix ratio is 1:1 and with a 10 minute working time there's some opportunity for repositioning. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 24 hours (at 72°F/22°C).

Easy Adhesion with Acrylic
Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability, although generally slightly lower than epoxy adhesives. However, they have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable.

Other 3M Sites:
Shop3M
Follow Us
The brands listed above are trademarks of 3M.