1. All 3M Products

3M™ Scotchkote™ Epoxy Coating 162PWX Pt B, Activator

3M ID GR200103913
  • High build single coat application
  • Applied by plural feed hot airless spray, brush, or roller
  • Drinking water pipelines
  • Applications
    Oil & Gas: Exploration and Pipeline, Oil & Gas: Refining, Oil & Gas: Transportation, Oil & Gas: Factory Applied Pipe Coating, Utilities & Power: Transmission & Distribution
  • Application Thickness
    Application dependent, single pass. For NSF certified applications, max thickness is 1mm (40 mil)
  • Color
  • Container Volume
    0.33 Liter
  • Container Volume (metric)
  • Coverage Area
    2 sq meter per litre at 500 micron dft
  • Drinking Water Approvals
    AFNOR XP P 41-256, ARPAL, AS/NZS 4020, NSF/ANSI 61, OTEC, Reg 31(4)a, WRAS
  • Family
  • Full Cure Time Temperature Time
    Hard dry 6 hours, full cure 7 days at 20°C (68°F)
  • Industry Solutions
    Protecting Potable Water Infrastructure, Storing Water
  • Mixed Color
  • Mix Ratio
    2:1 (Part A:Part B)
  • Product Type
  • Recommended Surfaces
    Cast Iron, Cement Mortar Lined pipe, Ductile Iron, Steel
  • RoHS 2011/65/EU Compliant
  • RoHS EU Comments
    Contact 3M for information
    *Important RoHS information
  • Shelf Life
    5 Year
  • Storage Temperature
    5 to 32 C⁰,‎ Store between 5C⁰ (40F⁰) and 32C⁰ (90F⁰)
  • Used With
    Potable Water (select countries and uses)
  • High build single coat application
  • Applied by plural feed hot airless spray, brush, or roller

Scotchkote™ Epoxy Coating 162PWX has been specifically developed to provide pipeline corrosion resistance in potable water applications. The ease of use of this 100% solids lining, combined with excellent chemical and corrosion resistance, make it an extremely versatile product for infrastructure protection.

Scotchkote Epoxy Coating 162PWX has been specifically developed for the long term protection of drinking water pipelines, storage and process tanks or vessels and related steelwork immersed or in contact with potable water. The product is a 2:1 mix ratio (2 Base to 1 Activator) and is supplied in either 1 litre packs or the Base and Activator supplied separately in 18 and 180 litre units.

Suggested Applications

  • Drinking water pipelines
  • Storage and process tanks (check local approvals prior to use for potable water)
  • Other equipment in contact with potable water
Follow Us
The brands listed above are trademarks of 3M.