1. All 3M Products
  • 3M™ Cold Shrink QT-III Silicone Rubber Termination 7656-S-HSG-4 (High-Amp), 5-25/28 kV, 1.53-2.32 in (21,1-38,9 mm) Cable Insul. O.D., 1 termination/kit
  • 3M™ Cold Shrink QT-III Silicone Rubber Termination 7656-S-HSG-4 (High-Amp), 5-25/28 kV, 1.53-2.32 in (21,1-38,9 mm) Cable Insul. O.D., 1 termination/kit

    Part Number 7656-S-HSG-43M ID 80610920094UPC 00054007422099
    • Provides a void-free seal to tape shield, longitudinally corrugated shield and wire-over-tape shield power cables
    • High dielectric-constant material regulates the distribution of electric field stress
    • Suitable for outdoor applications
    • Termination has 1.53 to 2.32-in insulation O.D.
     More...
    Specifications
    Attribute Name
    Value
    BIL
    150 kV
    Breakout Boot
    No
    Cable Insulation Outside Diameter Range
    1.53-2.32 in
    Cable Insulation Outside Diameter Range (metric)
    38.9-58.9 mm
    Compatible Lug
    QL2-A-1000-1250
    Conductor Size by Voltage
    (5 kV) 1750-2000 kcmil, (8 kV) 1500-2000 kcmil, (15 kV) 1250-2000 kcmil, (25/28 kV) 900-1750 kcmil
    Conductor Sizes
    1000 kcmil, 1250 kcmil, 1500 kcmil, 1750 kcmil, 2000 kcmil, 900 kcmil
    Family
    QT-III
    Indoor/Outdoor
    Outdoor Skirted
    Insulation Rejacketing
    No
    Lug/Stem Connector Included in Kit
    No
    Maximum Installed Length
    13.25 in
    Number of Conductors
    1
    Number of Skirts
    4
    Product Series
    7650-S-HSG
    RoHS 2011/65/EU Compliant
    Undetermined
    RoHS EU Comments
    Contact 3M for information
    *Important RoHS information
    Shielding Type
    Longitudinally Corrugated (LC), Tape Shield, Wire-Over-Tape Shield
    Trademark
    3M
    Voltage
    15 kV, 25/28 kV, 5 kV, 8 kV
    Details
    • Provides a void-free seal to tape shield, longitudinally corrugated shield and wire-over-tape shield power cables
    • High dielectric-constant material regulates the distribution of electric field stress
    • Suitable for outdoor applications
    • Termination has 1.53 to 2.32-in insulation O.D.
    • Accommodates wire sizes of 1750 to 2000 kcmil at 5kV, 1500 to 2000 kcmil at 8 kV, 1250 to 2000 kcmil at 15kV, 900 to 1750 kcmil at 25/28 kV
    • Unique step-core design and silicone sealing compounds enable easier installation
    • Withstands voltages of 5 to 35kV and is 150 kV BIL-rated
    • Includes a single-phase, cold shrink termination
    • IEEE Approved

    3M™ Cold Shrink QT-III 7650-S-HSG & 7660-S-HSG Series Termination Kit includes a single-phase, high-fault current termination. It ensures a pliable, tight seal for tape shield, longitudinally corrugated shield and wire-over-tape shield power cables. The conjunction of high dielectric-constant material and silicone sealing compounds allow the termination to withstand voltages of 5 to 35kV.

    3M™ Cold Shrink QT-III 7650-S-HSG & 7660-S-HSG Series Termination Kit is designed for terminating medium voltage, solid dielectric-shielded power cables. The UV stable, track- and erosion-resistant construction makes the termination suitable for outdoor applications. The lower surface stress, high dielectric-constant material provides an optimized BIL performance while ensuring a leak-proof, compact fit. IEEE Approved.

    Conductor Size Range for
    · 5 kV: 1750-2000 kcmil
    · 8 kV: 1500-2000 kcmil
    · 15 kV: 1250-2000 kcmil
    · 25/28 kV: 900-1750 kcmil

    This termination is compatible with the following lugs:
    QL2-A-1000-1250, for conductor range: 1250 kcmil (15kV), 1000-1250 kcmil (25/28kV)

    Follow Us
    The brands listed above are trademarks of 3M.