1. All 3M Products

3M™ Molded Rubber Splice 5421, CN and JCN Cable, 25/28 kV, 1 per case

Part Number 54213M ID 80610024137UPC 00054007158271
  • 3-piece inline splice to use on jacketed concentric neutral (JCN) or concentric neutral (CN) cables
  • Excellent electrical stress distribution
  • Designed for direct burial, aerial and submersible applications
  • Cable has 0.92 to 1.08-in insulation O.D.
 More...
View Legal Disclaimer
Specifications
  • Conductor Sizes
    1/0 AWG, 2/0 AWG, 3/0 AWG
  • Connector Included
    None
  • Insulation O.D. Range
    0.920 - 1.080 Inch
  • Insulation Outside Diameter Range
    0.920 - 1.080 Inch
  • Number of Conductors
    1
  • Product Series
    5420 Series
  • Product Technology
    Molded Rubber
  • Product Type
    Splice
  • RoHS 2011/65/EU Compliant
    Undetermined
  • RoHS EU Comments
    Contact 3M for information
    *Important RoHS information
  • Shielding Type
    Concentric Neutral (CN), Jacketed Concentric Neutral (JCN)
  • Splice Type
    Inline
  • Trademark
    3M
  • Voltage
    25/28 kV
Details
  • 3-piece inline splice to use on jacketed concentric neutral (JCN) or concentric neutral (CN) cables
  • Excellent electrical stress distribution
  • Designed for direct burial, aerial and submersible applications
  • Cable has 0.92 to 1.08-in insulation O.D.
  • Accommodates 1/0 to 3/0 AWG size conductor
  • Molded from specially formulated, peroxide-cured EPDM rubbers
  • Rated for 25/28 kV cables
  • Production-tested to offer reliability
  • Meets the requirements of IEEE 404 standards for cable joints

3M™ 5420 Series Molded Rubber QS-II Splice Kit is a 3-piece inline splice designed to use on 25/28 kV jacketed concentric neutral (JCN) or concentric neutral (CN) cables. A versatile design handles cables with a wide range of sizes and diameters. It is perfect for indoor and outdoor usage including direct burial, aerial and submersible applications.

3M™ 5420 Series Molded Rubber QS-II Splice Kit includes 2 molded conductive rubber end caps, 2 packets of silicone grease, a vinyl tape roll and an instruction sheet. It is suitable to use on cables that can withstand a maximum temperature of 90 degrees C. The splice is molded from specially formulated, peroxide-cured EPDM rubbers. The continuous current rating of each splice is the same as the current rating of the cable that it is sized to accommodate. The jacketing kit is needed for JCN cable. The kit meets the requirements of IEEE 404 standards for cable joints.

Resources
Instructions_Manual

Legal Disclaimer

Manufacturing Origin: USA

The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
Follow Us
The brands listed above are trademarks of 3M.