1. All 3M Products
  • 3M™ Cold Shrink Transition Splice Kit QS2012/13-3T-WS, Tape Shielded, Wire Shielded, UniShield®, EP-Lead or XLP-Lead, Concentric Neutral, Jacketed Concentric Neutral, 15 kV, 1 per case
  • 3M™ Cold Shrink Transition Splice Kit QS2012/13-3T-WS, Tape Shielded, Wire Shielded, UniShield®, EP-Lead or XLP-Lead, Concentric Neutral, Jacketed Concentric Neutral, 15 kV, 1 per case

    Part Number QS2012/13-3T-WS3M ID 80610987457UPC 00054007046448
    • Specially designed splice to connect a 3/C paper insulated lead covered (PILC) cable to three 1/C Poly/EPR insulated cables
    • Poly/EPR cables include CN, JCN, LC, tape shield, wire shield, poly/EP lead or UniShield® cables
    • Mastic components seal at Poly/EPR cable jacket ends
    • Poly/EPR cable has 0.91 to 1.36-in insulation O.D.
     More...
    Specifications
    • Connector O.D. Range
      0.90 - 1.30 Inch
    • Connector O.D. Range (metric)
      23 - 51 mm
    • Maximum Connector Length
      5.2 inch (Al), 5.5 inch (Cu)
    • Maximum Connector Length (metric)
      132 mm (Al), 140 mm (Cu)
    • Number of Conductors
      3
    • PILC Cable Conductor Sizes
      350 kcmil, 500 kcmil
    • Poly/EPR Cable Conductor Sizes
      250 kcmil, 350 kcmil, 500 kcmil
    • Poly/EPR Cable Conductor Sizes (metric)
      120 - 240 mm²
    • Poly/EPR Cable Insulation O.D. Range
      0.88 - 1.36 Inch
    • Poly/EPR Cable Insulation O.D. Range (metric)
      22.0 - 34.6 mm
    • Product Series
      QS-2000-3T & QS-2000-3T-WS Series
    • Product Technology
      Cold Shrink
    • Product Type
      PILC Splice
    • RoHS 2011/65/EU Compliant
      Undetermined
    • RoHS EU Comments
      Contact 3M for information
      *Important RoHS information
    • Shielding Type
      PILC
    • Splice Type
      PILC Trifurcating
    • Trademark
      3M
    • Voltage
      15 kV
    Details
    • Specially designed splice to connect a 3/C paper insulated lead covered (PILC) cable to three 1/C Poly/EPR insulated cables
    • Poly/EPR cables include CN, JCN, LC, tape shield, wire shield, poly/EP lead or UniShield® cables
    • Mastic components seal at Poly/EPR cable jacket ends
    • Poly/EPR cable has 0.91 to 1.36-in insulation O.D.
    • Accommodates 250 to 500 kcmil size Poly/EPR cable conductor
    • Silicone rubber-splice body controls the electrical field of the high voltage over the connector
    • Rated for 15 kV cables
    • Meets the requirements of IEEE 404 standards

    3M™ QS2011-3T-WS Series Cold Shrink Trifurcating Transition Splice Kit is a specially designed 15kV splice to connect a 3/C paper insulated lead covered (PILC) cable to three 1/C Poly/EPR insulated cables. Poly/EPR cables include CN, JCN, LC, tape shield, wire shield, poly/EP lead or UniShield® cables. It uses wraparound heat shrink rejacketing.

    3M™ QS2011-3T-WS Cold Shrink Trifurcating Transition Splice Kit includes 2 bags with components to seal oil inside and to seal the phase conductors of the PILC cable. The kit contains cold shrink splice bodies, an overall shield sleeve, heat shrink breakout boot, moisture sealing mastic materials, ground braid connectors, copper ground braids, resin and a heat shrink wraparound jacket sleeve. It is suitable to use on cables that can withstand a maximum temperature of 90 degrees C. The kit meets the requirements of IEEE 404 standards.

    Resources
    Data Sheet
    Info
    Instructions Manual
    Follow Us
    The brands listed above are trademarks of 3M.