1. All 3M Products
  • 3M™ Scotch-Weld™ Instant Adhesive CA40 Yellow, 1 fl oz, 12 per case
  • 3M™ Scotch-Weld™ Instant Adhesive CA40 Yellow, 1 fl oz, 12 per case

    3M ID 62380303305UPC 00021200742903
    • Very fast setting, cures at room temperature and reaches handling strength in a matter of seconds
    • Once bonded performs under a wide range of temperatures
    • Excellent adhesion to many substrates, including flexible vinyl and EPDM rubber
    • Economical to use as it requires only drops of adhesive to provide strong bonds to many metals, plastics and rubbers
     More...
    Specifications
    • Adhesive Type
      Cyanoacrylate
    • Brand
      Scotch-Weld
    • Color
      Yellow
    • Consumer Label
      No
    • Full Cure
      24 Hours @ 72 F (22 C)
    • Industries
      Construction, Consumer Goods, Electronics, General Industrial, Medical, Metalworking, Military & Government, MRO, Specialty Vehicle, Transportation
    • Physical Form
      Liquid
    • Product Form
      Bottle
    • Product Type
      Instant Adhesive
    • Shear Strength at 72 Degrees F (22 Degrees C)
      1700 Pound-Force Per Square Inch
    • Shelf Life in Months (from date of manufacture)
      9
    • Specific Gravity
      8.7 Pound Per Gallon (US)
    • Storage Temperature
      72 Degree Fahrenheit
    • Substrate 1
      EPDM Rubber, Fabric, Felt, Cork & Fibrous Glass, Flexible Foam (Latex, Urethane), Metal, Paper & Cardboard, Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Rigid Foam (Beadboard Styrene), Rigid Foam (Urethane), Rubber (Except EPDM)
    • Substrate 2
      EPDM Rubber, Fabric, Felt, Cork & Fibrous Glass, Flexible Foam (Latex, Urethane), Metal, Paper & Cardboard, Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Rigid Foam (Beadboard Styrene), Rigid Foam (Urethane), Rubber (Except EPDM)
    • Substrates
      EPDM Rubber, Fabric, Felt, Cork & Fibrous Glass, Flexible Foam (Latex, Urethane), Metal, Paper & Cardboard, Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Rigid Foam (Beadboard Styrene), Rigid Foam (Urethane), Rubber (Except EPDM)
    • Volume
      1 Fluid Ounce (US)
    Details
    • Very fast setting, cures at room temperature and reaches handling strength in a matter of seconds
    • Once bonded performs under a wide range of temperatures
    • Excellent adhesion to many substrates, including flexible vinyl and EPDM rubber
    • Economical to use as it requires only drops of adhesive to provide strong bonds to many metals, plastics and rubbers

    3M™ Scotch-Weld™ instant Adhesive CA40 is a high-strength, very fast-setting cyanoacrylate adhesive that cures at room temperature with very low bonding pressures. It has particularly good adhesion to many difficult to bond substrates such as EPDM rubber, aluminum and flexible vinyl.

    Instant, High Strength Results
    3M™ Scotch-Weld™ Instant Adhesive CA40 is a high strength cyanoacrylate instant adhesive. This low viscosity liquid adhesive bonds in only seconds (3 to 20 seconds) while still allowing a brief amount of time for alignment of parts. Once bonded, the adhesive will fully cure in just 24 hours. It can withstand a wide range of temperatures from- 65°F/-54°C to 180°F/82°C. This adhesive will bond to an extremely wide selection of materials and is useful in applications in most industries.

    Recommended Applications

    • Aluminum
    • EPDM rubber
    • Flexible vinyl
    • Most cured rubbers
    • Most plastics
    • General bonding applications
    • What are Cyanoacrylate Adhesives?
      Cyanoacrylate adhesives (instant adhesives) are single component, lower viscosity liquids that cure extremely quickly with just contact pressure and surface moisture. They adhere well, with thin bond lines, to plastics, metals and rubbers. With the use of primers, they can also adhere to low surface energy plastics and elastomers. They have lower flexibility, peel strength and impact resistance compared to other structural adhesives. They are generally used for gasket bonding and smaller assemblies.

    Resources
    Brochure
    Data Sheet
    Customer Reviews
    Other 3M Sites:
    Shop3M
    Follow Us
    The brands listed above are trademarks of 3M.