1. All 3M Products
  • 3M™ PPS™ Kit, 16114, Mini size, 200u filters, 1 kit per case
  • 3M™ PPS™ Kit, 16114, Mini size, 200u filters, 1 kit per case

    3M ID 60455050884UPC 00051131161146
    • 3M™ PPS™ is an all-in-one disposable solution for measuring, mixing, filtering and spraying liquid materials
    • 3M™ Paint Preparation System, PPS™ 6 oz (180 mL) liner and Mini lid kit
    • Lids available in two filter sizes: 200 micron and 125 micron
    • System enables the painter the ability to consistently spray at 90° to the part, no matter the surface orientation (even upside down)
     More...
    Specifications
    • Brand
      3M
    • Cup Size
      5.5 Ounce Mini
    • Filter Size
      200 Micron
    • National Stock Number
      4940015251234
    • Size
      Mini
    Details
    • 3M™ PPS™ is an all-in-one disposable solution for measuring, mixing, filtering and spraying liquid materials
    • 3M™ Paint Preparation System, PPS™ 6 oz (180 mL) liner and Mini lid kit
    • Lids available in two filter sizes: 200 micron and 125 micron
    • System enables the painter the ability to consistently spray at 90° to the part, no matter the surface orientation (even upside down)
    • The all-in-one solution reduces the chance of outside contamination and reduces paint consumption.
    • PPS™ reduces cleaning solvent consumption up to 70% and can reduce prep and clean-up time 50%
    • System delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use

    3M™ PPS™ Mini Kit includes 50 Mini size lids with welded-in filters, 50 liners (6 oz or 180 mL) and 20 sealing plugs. As part of the 3M™ PPS™ system, this kit allows you to measure, mix, filter and spray with ease.

    Disposable Lids
    Kits come with a choice of 125 or 200 micron welded-in filters. Consult with coating manufacturers for recommendation of filter size.

    Advantages of the 3M PPS System
    Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying.

    Your spray gun functions at any angle, even upside down.
    PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation -  i.e. 360 degrees.

    Clean Up is a Breeze and Uses Less Solvent
    After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.

    A Versatile System that Works with Most Spray Guns
    Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™  Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.

    Reduces the Chance of Contamination Between Jobs
    Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. 

    The Bottom Line: Why 3M™PPS™ is the Paint Spray System of Choice
    3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. Our goal is to help you operate with greater efficiency and spend less time on cleaning tasks (time associated with cleaning the paint reservoir and spray gun). 

    Suggested Applications

    • For spraying up to 170 ml of material
    • Ideal for all small and SMART repairs
    • Ideal for accessing awkward areas
    Back To Top
    Other 3M Sites:
    Shop3M
    Follow Us
    The brands listed above are trademarks of 3M.
    United States   
    English