1. All 3M Products

3M™ Dyneon™ Fluoroelastomer FE 5640Q, 55 lb Carton

  • Improved scorch resistance at high molding temperatures
  • Intermediate viscosity fluoroelastomer (FKM) with 66% fluorine
  • Proprietary incorporated cure technology may help save time and improve throughput
  • Clean running with excellent mold release and improved cure technology, resulting in more consistent part size from successive molding cycles
 More...
Specifications
  • Brand
    Dyneon™
  • Capabilities
    Temperature Resistance
  • Color
    Opaque Off-White
  • Composition
    Dipolymer made from hexafluoropropylene and vinylidene fluoride
  • Compression Set
    0.11 %
  • Container Volume
    55 lb.
  • Cure Technology
    Incorporated Cure
  • Elongation
    200 %
  • Fluorine Content
    65.9 %
  • Industries
    CPI/Semicon, Defense, Electrical, Mining, Oil and Gas, Rubber and Plastic, Transportation
  • Manufacturing Segment
    Powertrain
  • Mooney Viscosity
    40 MU
  • Net Weight
    55
  • Post Cure
    24 h @ 260°C
  • Press Cure
    5 min @ 177°C
  • Product Form
    Slab
  • Shelf Life
    3 Year
  • Specific Gravity
    1.8
  • Tensile Strength at Break
    16.3 MPa (2,370 psi)
  • Weight
    55 lb.
  • Weight (metric)
    25 kg
Details
  • Improved scorch resistance at high molding temperatures
  • Intermediate viscosity fluoroelastomer (FKM) with 66% fluorine
  • Proprietary incorporated cure technology may help save time and improve throughput
  • Clean running with excellent mold release and improved cure technology, resulting in more consistent part size from successive molding cycles

3M™ Dyneon™ Fluoroelastomer FE 5640Q is an intermediate viscosity copolymer of vinylidene fluoride and hexafluoropropylene with 66% fluorine. This fluoroelastomer (FKM) has excellent mold release and improved cure technology, resulting in more consistent part size from successive molding cycles.

Improved Cure Technology and Scorch Resistance
3M™ Dyneon™ Fluoroelastomer FE 5640Q is a copolymer of vinylidene fluoride and hexafluoropropylene. It can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, Dyneon Fluoroelastomer FE 5640Q should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability.

This clean running fluoroelastomer has a number of notable features beginning with the improved scorch resistance at high molding temperatures. In addition, the proprietary incorporated cure technology may help save time and improve throughput. The excellent mold release and improved cure technology will also help save time while maintaining consistent part size from successive molding cycles.

The Right Size to Fit the Job
This product is sold in different sizes, so compounders and formulators can pick the right size for the job. Dyneon™ Fluoroelastomer FE 5640Q is packaged in milled slab form (as opposed to unmilled forms like crumb) and is available in a returnable bulk shipping container system for 1,320 Ibs (600 kg) of material. The bulk container system is comprised of 48 individual polyethylene bags containing 27.5 Ibs (12.5 kg) of product. Smaller quantities are available in 55.1 Ibs (25.0 kg) boxes.

Delivering Custom Solutions
We offer over 50 grades of fluoroelastomers with varying monomer composition, Mooney viscosity and fluorine content. This broad offering combined with our expertise in application and product development translates into greater design flexibility.

For decades, 3M has been able to supply unique solutions to meet the increasing market challenges in developing and producing state of the art fluoroelastomer products at the highest quality level. This goes hand-in-hand with our unparalleled commitment to research and customer support. Like all of our products, 3M™ Dyneon™ Fluoroelastomer FE 5640Q is backed by skilled researchers at several 3M tech service laboratories. Collectively, our staff has hundreds of years of experience researching, developing and improving upon fluoroelastomers. Toward that end, we are in regular communication with customers who deliver feedback – allowing us to improve existing products and deliver custom solutions. All of this is part of an unrelenting drive to deliver top products to our customers. From coatings to calendered sheets, tubing to molded goods, 3M has a solution for your specialty application.

Recommended Applications

  • Compression molding
  • Extrusion
  • Transfer molding

Suggested Applications

  • O-rings, seals, gaskets and hose for the following markets:
  • Automotive Powertrain
  • Transportation Fuel Systems
  • Lubricant Application
  • Chemical Processing
  • Oil and Gas Exploration
Resources
Data Sheet
Follow Us
The brands listed above are trademarks of 3M.