1. All 3M Products
  • 3M™ Urethane Foam Tape 4317 Charcoal Gray, 1/2 in x 9 yd, 18 per case
  • 3M™ Urethane Foam Tape 4317 Charcoal Gray, 1/2 in x 9 yd, 18 per case

    3M Product Number 43173M ID 70006095767UPC 00051131064447
    • Charcoal gray, 0.375 in. (9.5 mm) soft conformable, low-density, open-cell foam design helps seal out air, dust and light when compressed
    • Excellent cushioning characteristics and high absorbency
    • Dampens sounds and absorbs vibration when used in electronic applications
    • Offers high initial quick-stick to multiple substrates
     More...
    Specifications
    • Adhesive Type
      Acrylic
    • Brand
      3M
    • Carrier Material
      Urethane
    • Color
      Charcoal Gray
    • Consumer Label
      No
    • Density
      2 Pound Per Cubic Foot
    • Density (metric)
      30 kg/m³
    • Industries
      Appliance, Automotive, General Industrial, Specialty Vehicle, Transportation
    • Length
      9 Linear Yard
    • Length (Metric)
      8.22 m
    • Maximum Operating Temperature (Fahrenheit)
      150 Degree Fahrenheit
    • National Stock Number
      9330012648696
    • Primary Liner
      Paper
    • Primary Liner Color
      Tan
    • Primary Liner Thickness
      3 mil
    • Primary Liner Thickness (metric)
      0.08 mm
    • Product Form
      Roll
    • Shelf Life in Months (from date of manufacture)
      18
    • Temperature Resistance - Initial
      250 Degree Fahrenheit
    • Thickness
      375 mil
    • Thickness (Metric)
      9.5 mm
    • Width
      0.5 Inch
    • Width (Metric)
      12.7 mm
    Details
    • Charcoal gray, 0.375 in. (9.5 mm) soft conformable, low-density, open-cell foam design helps seal out air, dust and light when compressed
    • Excellent cushioning characteristics and high absorbency
    • Dampens sounds and absorbs vibration when used in electronic applications
    • Offers high initial quick-stick to multiple substrates
    • Provides excellent shear strength and high temperature performance

    3M™ Urethane Foam Tape 4317 is a conformable, low-density, open-cell foam tape with a pressure sensitive acrylic adhesive on one side. This tape will adhere to a variety of substrates and can be used in numerous mounting applications to dampen sound and create a clean and durable product.

    3M™ Urethane Foam Tape 4318 is 1/8 in. thick, comprised of a soft conformable, low-density, open-cell foam with a pressure sensitive acrylic adhesive on one side.
    When compressed 50%, the open cell construction of 3M Urethane Foam Tape 4317 provides an air barrier and cushion in electronic equipment
    Seals Out Moisture, Dust and Drafts
    3M™ Urethane Foam Tape 4317 is 3/8 in. thick, comprised of a soft conformable, low-density, open-cell foam with a pressure sensitive acrylic adhesive on one side. The adhesive is protected by a silicone treated paper liner. It offers excellent cushioning characteristics while providing high absorbency to seal out moisture, dust and drafts. It can perform under a wide range of temperatures. Special note: Extra care should be taken when handling to avoid damaging tape.

    Recommended Applications
    • Cushion and dampen sound in electronics such as printers, keyboards, computers, aircraft lights and automotive dashboards
    • Register covers
    • Recessed lighting
    • Door, window and cabinet seals
    Excellent Shear Holding Strength with 3M™ Adhesive 430
    3M™ Urethane Foam Tape 4317 features 3M™ Adhesive 430. This pressure sensitive, modified acrylic adhesive provides high initial quick-stick to a variety of surfaces and substrates. It has an excellent chemical resistant and shear holding strength, even at elevated temperatures. Adhesive 430 is designed to perform at temperatures up to 180°F (82°C) in the short term and 150°F (70°C) long term.

    Protect Sensitive Components
    The adhesion of 3M™ Single-Coated Foam Tapes is typically satisfactory within 20 minutes and continues to build with additional time. The adhesive is protected by a thick, silicone treated paper liner and has a firm, high-density foam. This design offers an attractive and clean appearance after application.

    What is Open Cell Foam?
    Open cell foams are commonly used between component panels where a degree of separation is needed to dampen or prevent vibration, as a thermal insulation barrier and to protect against contamination, but where a measure of airflow is still necessary, such as with electronic components where air flow helps keeps components cool.

    Resources
    Application Guide
    Customer Reviews
    • bvseo_sdk, java_sdk, bvseo-3.2.0
    • CLOUD, getContent, 59ms
    • REVIEWS, PRODUCT
    • bvseo-msg: The resource to the URL or file is currently unavailable.;
    Large Volume Order

    If you are considering a large purchase of this or other 3M Industrial Adhesives and Tape products, our inside sales team is ready to help by providing additional information and options. Our technical expertise, customer support, and global capabilities put us in a unique position to address your biggest challenges, and we’ll do our best to prove that we should be your supplier of choice.


    All fields are required

    • The information you provide on this Contact Us form will be used to respond to your request and as further described in our Internet Privacy Policy.

      Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use the Contact Us system.

    • Send
    Follow Us
    The brands listed above are trademarks of 3M.