1. All 3M Products

3M™ Cold Shrink QS-III Splice Kits 5777A-MT, Tape, Wire and UniShield®, 15 kV, Standard, 1 per case

Part Number 5777A-MT3M ID 80611207384UPC 00054007442899
  • Splices shielded cables
  • Silicon rubber-splice body provides good high- or low-temperature performance and Armorcast™ jacket offers mechanical protection
  • Suitable for use with 10000 and 20000 Series connectors or other UL Listed inline compression connectors
  • Solderless ground braid offers constant force spring connection
 More...
View Legal Disclaimer
Specifications
  • Conductor Sizes for 15 kV
    350 kcmil, 500 kcmil, 750 kcmil
  • Conductor Sizes for 5_8 kV
    1000 kcmil, 750 kcmil
  • Insulation O.D. Range
    1.04 - 1.70 Inch
  • Insulation Outside Diameter Range
    1.04 - 1.70 Inch
  • Number of Conductors
    3
  • Product Series
    5775A-MT, 5776A-MT & 5777A-MT Series
  • Product Technology
    Cold Shrink, Armorcast
  • Product Type
    Splice
  • RoHS 2011/65/EU Compliant
    Undetermined
  • RoHS EU Comments
    Contact 3M for information
    *Important RoHS information
  • Shielding Type
    Tape Shield
  • Splice Type
    Inline
  • Suggested Accessory
    3M™ Trifurcating Accessory for 3-C to 3 Single Conductors MT-E
  • Trademark
    3M
  • Typical Splice Length
    58.0 in
  • Typical Splice Length (metric)
    147 cm
  • Voltage
    15 kV, 5/8 kV
Details
  • Splices shielded cables
  • Silicon rubber-splice body provides good high- or low-temperature performance and Armorcast™ jacket offers mechanical protection
  • Suitable for use with 10000 and 20000 Series connectors or other UL Listed inline compression connectors
  • Solderless ground braid offers constant force spring connection
  • 1.04 to 1.7-in O.D. insulation
  • Accommodates wire size of 350 to 1000 kcmil
  • Rated for 5/8 to 15 kV applications
  • Includes 3 cold shrink adapter tubes and splice bodies, 6 tubes of P55/R compound, gloves, 5 rolls of Armorcast™ structural material and more
  • IEEE Approved
  • 1 kit/case

3M™ 5777A-MT Series Cold Shrink Resin QS-III Inline Trifurcating Cable Splice Kit is designed for splicing 5/8 to 15 kV shielded power cables. The cold shrink design ensures a quick installation and cable size transitions. This armored or non-armored splice kit is perfect for use in cable trays, cable racks, junction boxes and cable hangers, as well as aerial and wet or dry locations.

3M™ 5777A-MT Series Cold Shrink Resin QS-III Inline Cable Splice Kit includes 3 metallic shield sleeves, 6 small and 2 large constant force springs, 2 cold shrink jacket tubes, 2 mastic tape 2229 and more. This cable splice kit uses constant force springs for connecting ground braid jumpers, splice bodies and tapes for moisture-seal applications. The splice body has a specially formulated silicone rubber construction to ensure optimal high- and low-temperature performance. This splice kit is suitable for use with solid dielectric cables such as XLP, XLPE, EPR and more. IEEE Approved.

Suggested Applications

  • For inline splicing
  • For armored and non-armored cables
  • For 15kV rated cables
  • For cable conductor size range of 2 AWG to 750 kcmil
  • For use with solid dielectric cables; XLP, XLPE, EPR and etc.
  • For indoor and outdoor applications:
  • Cable Tray
  • Cable Rack
  • Cable Hangers
  • Junction Box
  • Aerial
  • Wet or dry locations
Customer review

Legal Disclaimer

Manufacturing Origin: USA

The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
Follow Us
The brands listed above are trademarks of 3M.